gutter system
The Struga Quattro gutter system is a uniform product, which means that all elements are made of steel and manufactured in automatic production.
paint and function warranty
4 colors
3D visualization
Product description
The material above all
The Struga gutter system is made of Scandinavian SSAB GreenCoat RWS PRO steel sheet. The galvanized material is varnished on both sides with a 35 µm coating. Depending on the element, the sheet thickness is 0,6-1,25 mm.
Two-piece fascia hook
Material:
• fixed part: galvanized flat bar 5 × 30 mm,
powder coated,
• movable part: metallurgical lacquered sheet with a thickness of
1,25 millimetres.
Installation at low temperatures and 100% resistance
Steel is a very durable material with low thermal expansion. Installation of the Struga gutter system in sub-zero temperatures is not a challenge. In addition, the concept of gutter connectors and lids, different than the market standard, ensures 100% efficiency against leaks, even for stagnant rainwater.
Thoughtful design
Aesthetics and the highest quality go hand in hand. Closure of the downpipe in the form of a rabbet hidden inside, side connection of the pipe elbows, professionally made pressings of the downpipe or hooks to the fascia board are just some of the examples of well-thought-out design.
Warranty
The Struga gutter system is covered by an automatic warranty for maintaining functionality for 50 years and for the paint coating for 20 years. Each color of the roof sheathing will find its equivalent in a wide range of colors that are constantly available.
Steel gutters - a sure investment
Steel is the most important construction material in the world. The Struga steel gutter system ensures durability for decades.
As a complement to the roof system, it fits perfectly with the sheathing, maintaining full functionality throughout the entire period of operation.
Technical data
Materials
Steel - the solid basis of the product
Scandinavian sheet metal by SSAB is a hot-dip galvanized steel core,
coated on both sides with a primer layer and matt varnish
GreenCoat RWS Pro BT with a thickness of 35 μm.
The Struga Quattro gutter system is a uniform product, which means that all of them
the elements are made of steel and produced in automatic production.
The product distinguishes:
- symmetrical suspended gutter without hooks visible from the bottom;
- universal corner pressed from a single piece of sheet metal;
- downpipe with an original trapezoidal shape with rounded corners;
- proven and XNUMX% tight gutter connectors, lids and clamps
downpipe.
The Struga Quattro system is available in one suitable size
round system 135/100.
It is dedicated to plots with an area of 125-250 m2, assuming
the use of one extreme and two extreme triggers, respectively.
SSAB GreenCoat sheet in bio-technology (BT) replaces a large part of petroleum compounds in the final paint coating with Swedish rapeseed oil. This means less burden on the environment by eliminating the release of harmful substances into the air. Polyurethane varnish is the most scratch-resistant top layer of coated metal sheets.
Struga Quattro products
Universal pipe holder
An element to be used on facades with thermal insulation and directly to the wall. The cage nut available in the set enables the use of a pin. The second nut with a bolt acts as a lock for the clamp.
Available pin lengths: 100 / 160 / 200 / 250 / 300 / 360 mm (pins sold separately).
Pin with a sleeve for the downpipe holder
Available pin lengths: 100 / 160 / 200 / 250 / 300 mm (pins sold separately)
Quattro pipe
Spout
Downpipe elbow, face and wall.
The unique shape of the downpipe forced the presence of two elbows. They also function as a spout.
Downpipe bend, wall-mounted
Wall downpipe elbow.
The unique shape of the downpipe required the presence of two elbows. It also serves as a spout.
Downpipe elbow, frontal
Drain funnel
Corner 90°
Universal element, internal and external.
Gutter connector with butyl tape
Proven in the round system, by using a butyl gasket at the gutter connection. It ensures 100% tightness.
Quattro gutter
The symmetrical suspended gutter complements the roof slope, creating the impression of a built-up area. Due to the suspension on a two-part hook, the mounting elements are invisible to the recipient.
Two-piece fascia hook
Material:
fixed part: galvanized flat bar 5 × 30 mm, powder coated
movable part: metallurgical varnished sheet metal with a thickness of 1,25 mm
Universal gutter cover with a gasket, set of 2 pcs.
Two sets, lids and butyl rubber gaskets to be applied inside the gutter, after putting on the lid. They ensure 100% tightness and prevent water stagnation on the cut edge of the gutter.
Quattro downpipe
Adapter
Struga Quattro
Our projects
A perfect combination of the convenience of modular metal roof tiles and the aesthetics of conventional solutions.
